Electronic Blasting System

Electronic Detonators

Hanwha's Electronic Blasting System

Hanwha’s Electronic Blasting System (HEBS-II) is deigned to maximize blast performance by utilising advanced electronic technology.

HEBS-II integrates Three Types of Operating Modes: Scanning, Logging and Tagging Inherently Safe with Multiple Inbuilt Redundancies and Safety Mechanisms.

HEBS-II

TECHNICAL DATA

Choose the most suitable operation mode for your site
for convenient and quicker implementation.
· HiTRONIC II™
· Harnesswire
· Blaster
· Planner
· Logger

HEBS-II

Benefits

· Choose the most suitable Operating Mode for your site to implement with maximum efficiency.

· Highly portable, each set weighs less than 2 kg

· Up to 5km remote blasting distance (line of sight).
· Maximum delay time : 50,000ms

· Up to 21 blasters can be linked providing the possibility of firing up to 63,000 detonators.

· Viewable Logging System with GPS technology.

HEBS-II

SAFETY SPECIFICATION

Electrostatic Discharge Resistance
30kV, 2500uF (wire to wire and wire to shell)
Over-current test
Not detonating at 4A over-current
EMC
CS(Conducive Susceptibility)
RS(Radiation Susceptibility)
No unintended detonations under 150kHz~80MHz, 30V conditions Normal operation under 10V conditions

-No unintended detonations at 30V/m and normal operation at 10V/m under 80MHz~1.0GHz conditions

-No unintended detonations at 10V/m and normal operation at 3V/m under 1.0GHz~2.0GHz conditions

Thermal shock test
Not detonating at during storage in 75℃ chamber for 48 hours
Combined force
When 40N’s load is suspended for 120 seconds on the wire, it is not cut off by the load, Also, the plug and the shell are not broken.
Vibration test
After vibrating the shell at 50Hz for one hour, the weight change is less than 10mg
Shell road test
No cracking or bending of the shell after hanging 50N load for 5 seconds
Drop test
Not detonating when the product is freely dropped from a height of 5m
Water resistant test
– STD : 2 days with 7 bar
– HD : 28days with 7bar
Electrostatic Discharge Resistance
30kV, 2500uF (wire to wire and wire to shell)
Over-current test
Not detonating at 4A over-current
EMC
CS(Conducive Susceptibility)
RS(Radiation Susceptibility)
No unintended detonations under 150kHz~80MHz, 30V conditions Normal operation under 10V conditions

-No unintended detonations at 30V/m and normal operation at 10V/m under 80MHz~1.0GHz conditions

-No unintended detonations at 10V/m and normal operation at 3V/m under 1.0GHz~2.0GHz conditions

Thermal shock test

Not detonating during storage in 75°C chamber for 48 hours

Combined force
When 40N’s load is suspended for 120 seconds on the wire, it is not cut off by the load, Also, the plug and the shell are not broken.
Vibration test
After vibrating the shell at 50Hz for one hour, the weight change is less than 10mg
Shell road test
No cracking or bending of the shell after hanging 50N load for 5 seconds
Drop test
Not detonating when the product is freely dropped from a height of 5m
Water resistant test
– STD : 2 days with 7 bar
– HD : 28days with 7bar

Operation Guidelines

Firmware Download

HEBS-II

Hanwha Electronic Blasting System II

Hanwha Electronic Blasting System II (HEBS-II) consists of HiTRONIC II™ Electronic Detonator, Blaster, Logger, Planner and Harness wire. HiTRONIC II electronic detonators are programmable and reprogrammable from 0ms to 50,000ms in 1ms intervals, so the system can deliver a range of timing/blasting options with high accuracy and precision.

Blaster

Logger
Planner

Q&A

If you have any queries,
please leave your questions or comments.

Contact Us

Please feel free to contact us or leave your questions or comments using the Contact Us link.