전자뇌관(HEBS II)

HANWHA ELECTRONIC BLASTING SYSTEM

Hanwha Electronic Blasting System

한화의 전자 발파 시스템(HEBS-II)은 최첨단 전자기술을 활용하여
발파 효율 극대화 하기위해 설계되었습니다.

HEBS-II는 3가지 운영모드로 구성되어 있습니다.
이는 Scanning, Logging 그리고 Tagging 운영모드로 각각의 모드는 내재되어있는 안전 메커니즘을 통해 발파의 안정성을 한 층 증진 시킬 수 있습니다.

HEBS-II

구성 사항

Electrostatic Discharge Resistance
30kV, 2500uF (wire to wire and wire to shell)
Over-current test
Not detonating at 4A over-current
EMC
CS(Conducive Susceptibility)
RS(Radiation Susceptibility)
No unintended detonations under 150kHz~80MHz, 30V conditions Normal operation under 10V conditions

-No unintended detonations at 30V/m and normal operation at 10V/m under 80MHz~1.0GHz conditions

-No unintended detonations at 10V/m and normal operation at 3V/m under 1.0GHz~2.0GHz conditions

Thermal shock test
Not detonating at during storage in 75℃ chamber for 48 hours
Combined force
When 40N’s load is suspended for 120 seconds on the wire, it is not cut off by the load, Also, the plug and the shell are not broken.
Vibration test
After vibrating the shell at 50Hz for one hour, the weight change is less than 10mg
Shell road test
No cracking or bending of the shell after hanging 50N load for 5 seconds
Drop test
Not detonating when the product is freely dropped from a height of 5m
Water resistant test
– STD : 2 days with 7 bar
– HD : 28days with 7bar
Electrostatic Discharge Resistance
30kV, 2500uF (wire to wire and wire to shell)
Over-current test
Not detonating at 4A over-current
EMC
CS(Conducive Susceptibility)
RS(Radiation Susceptibility)
No unintended detonations under 150kHz~80MHz, 30V conditions Normal operation under 10V conditions

-No unintended detonations at 30V/m and normal operation at 10V/m under 80MHz~1.0GHz conditions

-No unintended detonations at 10V/m and normal operation at 3V/m under 1.0GHz~2.0GHz conditions

Thermal shock test
Not detonating at during storage in 75℃ chamber for 48 hours
Combined force
When 40N’s load is suspended for 120 seconds on the wire, it is not cut off by the load, Also, the plug and the shell are not broken.
Vibration test
After vibrating the shell at 50Hz for one hour, the weight change is less than 10mg
Shell road test
No cracking or bending of the shell after hanging 50N load for 5 seconds
Drop test
Not detonating when the product is freely dropped from a height of 5m
Water resistant test
– STD : 2 days with 7 bar
– HD : 28days with 7bar

HEBS-II

Benefit

· 최상의 발파효율을 위해 발파현장에 가장 적합한 운영모드를 선택하십시오.

· 구성품의 총 무게가 2kg 미만이기에, 휴대성이 좋습니다.

· 최대 발파거리: 5km(사선)
· 최대 지연 초시: 50,000ms

· 최대 21개의 발파기를 연결하여 최대 36,000개의 전자뇌관을 기폭 가능

· GPS를 통한 Viewalble Logging System

Operation Guidelines

HEBS-II(한글)

Hanwha Electronic Blasting System II (HEBS-II) consists of HiTRONIC IITM Electronic Detonator, Blaster, Logger, Planner and Harness wire. HiTRONIC II electronic detonators are programmable and reprogrammable from 0ms to 50,000ms in 1ms intervals, so the system can deliver a range of timing/blasting options with high accuracy and precision.

Firmware Download

Blaster

Logger

Planner

Q&A

문의사항이 있으시면
질문이나 의견을 남겨주세요.

Contact Us

연락 혹은 문의 링크를 사용하여
질문이나 의견을 남겨주세요.